NBMiner

　　

　　GPU Miner for , , , , , ,

　　nbminer.com & NBMiner_github are the only 2 officially maintained site for publishing information and new releases of NBMiner.

　　Be aware when you download NBMiner binaries from other sources.

Email:

Discord

BitcoinTalk

version

Windows

Linux

42.3

NBMiner_42.3_Win.zip

NBMiner_42.3_Linux.tgz

42.2

NBMiner_42.2_Win.zip

NBMiner_42.2_Linux.tgz

41.5

NBMiner_41.5_Win.zip

NBMiner_41.5_Linux.tgz

41.3

NBMiner_41.3_Win.zip

NBMiner_41.3_Linux.tgz

41.0

NBMiner_41.0_Win.zip

NBMiner_41.0_Linux.tgz

40.1

NBMiner_40.1_Win.zip

NBMiner_40.1_Linux.tgz

Download older versions from github releases

Support Windows & Linux.

Nvidia LHR GPU 100% unlock for ETH & ETC mining.

Support backup mining pool configuration.

Support SSL connection to mining pools.

Dev Fee:

ethash etchash 1%

cuckoo_ae 2%

kawpow 2%

beamv3 2%

octopus 3%

ergo 2%

NVIDIA Driver version: >= 410.

Nvidia GPU Specific Requirements:

Algorithm

Coin

Compute Capability

Memory (Win7 & Linux)

Memory (Win10)

ethash

ETH

6.0, 6.1, 7.0, 7.5, 8.0,8.6

6GB

6GB

etchash

ETC

6.0, 6.1, 7.0, 7.5, 8.0,8.6

4GB

4GB

cuckoo_ae

AE

6.0, 6.1, 7.0, 7.5, 8.0,8.6

5GB

6GB

kawpow

RVN

6.0, 6.1, 7.0, 7.5, 8.0,8.6

4GB

4GB

beamv3

BEAM

6.0, 6.1, 7.0, 7.5

3GB

3GB

octopus

CFX

6.0, 6.1, 7.0, 7.5, 8.0,8.6

5GB

6GB

ergo

ERGO

6.0, 6.1, 7.0, 7.5, 8.0,8.6

3GB

3GB

* Compute Capability reference link: wikipedia

ETH

ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org:4444 -u 0x12343bdgf.worker

f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker

nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker

herominers: nbminer -a ethash -o ethproxy+tcp://ethereum.herominers.com:10201 -u 0x12343bdgf.worker

nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.auto.nicehash.com:9200 -u btc_address.worker

miningpoolhub: nbminer -a ethash -o nicehash+tcp://asia.ethash-hub.miningpoolhub.com:20535 -u username.worker

ETC

ethermine: nbminer -a etchash -o stratum+tcp://asia1-etc.ethermine.org:4444 -u wallet.worker

nicehash: nbminer -a etchash -o nicehash+tcp://etchash.auto.nicehash.com:9200 -u btc_address.worker

f2pool: nbminer -a etchash -o stratum+tcp://etc.f2pool.com:8118 -u wallet.worker

2miners: nbminer -a etchash -o stratum+tcp://etc.2miners.com:1010 -u wallet.worker

ETH+ZIL

ezil: nbminer -a ethash -o stratum+tcp://cn.ezil.me:5555 -u ETH_WALLET.ZIL_WALLET.WORKER –enable-dag-cache

shardpool: nbminer -a ethash -o stratum+tcp://ch1-zil.shardpool.io:3333 -u ETH_WALLET.WORKER -p :3333 -enable-dag-cache

AE

f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.worker:passwd

nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test

RVN

f2pool: nbminer -a kawpow -o stratum+tcp://raven.f2pool.com:3636 -u wallet.worker:passwd

minermore: nbminer -a kawpow -o stratum+tcp://us.rvn.minermore.com:4501 -u wallet.worker:paswd

bsod: nbminer -a kawpow -o stratum+tcp://pool.bsod.pw:2640 -u wallet.worker:passwd

woolypooly: nbminer -a kawpow -o stratum+tcp://rvn.woolypooly.com:55555 -u wallet.worker:passwd

BEAM

leafpool: nbminer -a beamv3 -o stratum+ssl://beam-eu.leafpool.com:3333 -u wallet.worker:passwd

herominers: nbminer -a beamv3 -o stratum+ssl://beam.herominers.com:10231 -u wallet.worker:passwd

nicehash: nbminer -a beamv3 -o stratum+tcp://beamv3.eu.nicehash.com:3387 -u btc_address.worker

CONFLUX

poolflare: nbminer -a octopus -o stratum+tcp://cfx.ss.poolflare.com:3366 -u wallet.worker

f2pool: nbminer -a octopus -o stratum+tcp://cfx.f2pool.com:6800 -u username.worker

woolypooly: nbminer -a octopus -o stratum+tcp://cfx.woolypooly.com:3094 -u wallet.worker

nicehash: nbminer -a octopus -o stratum+tcp://octopus.auto.nicehash.com:9200 -u btc_address.worker

ERGO

herominers: nbminer -a ergo -o stratum+tcp://ergo.herominers.com:10250 -u wallet.worker

woolypooly: nbminer -a ergo -o stratum+tcp://erg.woolypooly.com:3100 -u wallet.worker

nanopool: nbminer -a ergo -o stratum+tcp://ergo-eu1.nanopool.org:11111 -u wallet.worker

666pool: nbminer -a ergo -o stratum+tcp://ergo.666pool.cn:9556 -u wallet.worker

nicehash: nbminer -a ergo -o stratum+tcp://autolykos.auto.nicehash.com:9200 -u wallet.worker

　　nbminer -a algo -o protocol+socket_type://pool_host:pool_port -u wallet_address.worker -p passwd

　　-h, –help Displays this help.

　　-v, –version Displays version information.

　　-c, –config <config file path> Use json format config file rather than cmd line options.

　　–generate-config <filename> Generate a sample config json file.

　　-a, –algo <algo> Select mining algorithm

　　–api <host:port> The endpoint for serving REST API.

　　-o, –url <url> Mining pool url.

　　-u, –user <user> User used in Mining pool, wallet address or username.

　　-o1, –url1 <url> url for backup mining pool 1.

　　-u1, –user1 <user> username for backup mining pool 1.

　　-o2, –url2 <url> url for backup mining pool 2.

　　-u2, –user2 <user> username for backup mining pool 2.

　　-p, –password <password> password for mining pool

　　-p1, –password1 <password> password for backup mining pool1

　　-p2, –password2 <password> password for backup mining pool2

　　-d, –devices <devices> Specify GPU list to use. Format: “-d 0,1,2,3” to use first 4 GPU.

　　-i, –intensity <intensities> Comma-separated list of intensities (1 -100).

　　–strict-ssl Check validity of certificate when use SSL connection.

　　–proxy Socks5 proxy used to eastablish connection with pool, E.g. 127.0.0.1:1080

　　–cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Smaller value means higher CPU usage to gain more hashrate. Set to 0 means autumatically adapt. Default: 0.

　　–temperature-limit, –tl <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU.

　　–temperature-start, –ts <temp-start> Set cool-down temperature target if GPU is stopped by , default to <temp-limit> - 5.

　　–log Generate log file named .

　　–log-file <filename> Generate custom log file. Note: This option will override .

　　–log-no-job Set this option to disable ‘New job’ info in console and log file.

　　–log-cycle <cycle> Set to change the cycle of Summary table show in console and log, in seconds, defaults to 30.

　　–no-health Do not query device health status. (Do not set if use LHR gpu)

　　–no-color Do not use colorful output log in cmd line.

　　–long-format Use ‘yyMMdd HH:mm:ss,zzz’ for log time format.

　　–verbose Print communication data between miner and pool in log file.

　　–device-info Print device cuda information.

　　–device-info-json Print out detailed information for every device in json format.

　　–fee <fee> Change devfee in percentage, [0-5]. Set to ‘0’ to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, default_value).

　　–no-watchdog Disable watchdog process.

　　–platform <platform> Choose platform，0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only

　　–share-check <value> If <value> minutes without share, reboot miner, set 0 to disable. Default: 30

　　–no-interrupt set this option will disable miner interrupting current GPU jobs when a new job coming from pool, will cause less power supply issue, but might lead to a bit higher stale ratio and reject shares.

　　–enable-igpu AMD igpu is disabled by default, set this option to enable.

　　–mt, –memory-tweak <mode> Memory timings optimize for Nvidia GDDR5 & GDDR5X gpus. range [1-6]. Higher value equals higher hashrate. Individual value can be set via comma seperated list. Power limit may need to be tuned up to get more hashrate. Higher reject share ratio can happen if mining rig hits high temperature, set lower value of can reduce reject ratio.

　　–power-limit, –pl <limit> Set power limit of GPU.

　　​ Set PL in watts: -pl 200.

　　​ Set PL in percetage of default PowerLimit: -pl 75%

　　–cclock <clocks> Set core clock in MHz.

Set clock offsets: -cclock 100, -cclock -500 (Windows only)

Set locked clock: -cclock @1500.

　　–mclock <clocks> Set memory clock offsets in MHz. (Windows only)

　　–lock-cv <cv> Set locked core voltages in mV. (Windows only)

　　–fan <speed> Set GPU fan speed in percentage. (Windows only)

　　–lhr-mode <mode> LHR unlock mode. Mode 1 better compatibility (default mode), Mode 2 better stability.

　　Open http://api_host:port/ in your browser to use web monitor.

　　GET http://api_host:port/api/v1/status

v42.3(2022-09-02)

: Add support for NiceHash ETC pool.

v42.2(2022-05-26)

　　Compared to v41.5

: Add a new option to select LHR unlock mode.

is the default mode and is the same as which in

Try to use if stability issue encountered in , for json config, use

GPUs can only use

: Extend LHR unlocker to work with old driver versions. Starting from and , LHR unlocker no longer works, make sure not to use these new driver versions.

: small hashrate improvement on Nvidia GPUs.

: Add memory temp in summary table for Linux.

: Add and in log.

: Add Nvidia driver versoin in summary table.

: Add for protocol.

: If applies through , reset settings to stock when miner exit.

: option on windows does not require custom driver anymore (admin priviledge is required).

: NBMiner versions older than v39.5 (not included) will run into issue when ETH reaches (Approx mid September). Please make sure to upgrade to a newer version before that if ETH is still with POW.

v41.5(2022-05-13)

: Add 90% LHR unlocker for & .

: Add LHR unlocker support.

: LHR unlocker improve stability.

v41.3(2022-05-10)

: Improve stability of LHR unlocker.

: Fix crash on AMD GPUs

: Improve compatibility on rigs with small system memory.

: Recommend driver versions: for Windows, for Linux.

v41.0(2022-05-08)

: 100% LHR unlocker added, for both Windows & Linux.

Run nbminer with admin priviledge to get 100% LHR unlock

Tested and verified on drivers: for Windows, for Linux.

Other driver versions may have some compatibility issue.

Previous LHR mode are removed.

v40.1(2021-11-24)

: v40.0 false detected as LHR lock under lastest Nvidia driver versions.

: supports future LHR GPU models.

v40.0(2021-11-23)

　　: Add overclock options for Nvidia GPUs, require admin priviledge, accept comma seprated list to specify for each GPU.

　　: Set power limitation of GPU. Examples:

　　​ Set PL in watts:

　　​ Set PL in percentage of default PowerLimit: (in Windows bat file, need dual , )

　　: Set core clock in MHz. Examples:

　　​ Set clock offsets: (Windows only)

　　​ Set locked clocks:

　　: Set memory clock offsets in MHz (Windows only)

　　: Set locked core voltage of GPU in mV, support Turing and newer GPUs. (Windows only)

　　: Set fan speed in percentage of GPU. (Windows only)

　　: Display current LHR value in console summary table and web monitor.

　　: options now support username & password for SOCKS5 proxy. format:

　　: Web monitor changes, delete unused information for dual mining.

　　: new options for log control.

: Turn off the line in console.

: Set to change the cycle of Summary table show in console and log, in seconds, defaults to 30.

　　: Change CPU share validation to independent thread, lower performance degradation when mining at very low difficulty pools.

　　: LHR lock detected failure on some cases.

v39.7(2021-10-30)

: LHR mode support new GA104 version of 3060

: Turn on LHR mode by default for 3060 v1, disabled by default only on windows 470.05

: Fail to detect LHR lock on certain situation.

: Nvidia GPU power consumption issue on certain rig config.

: support for .

v39.6(2021-10-27)

: LHR mode significant improvement:

higher hashrate, more stable LHR unlocking for both and

default LHR mode changes to for LHR GPUs

default values of LHR mode increased, -> 74, -> 71

added 3 new options for LHR auto-tuning control, at most cases you don’t need to change:

: the amount to reduce value on a single tuning. defaults to .

: When LHR lock is detected, and the time since the last lock exceeds this value, the reduce will not perform. defaults to , which means 15 minutes.

: the maximum number of times to reduce value, defaults to .

Typical hashrate: 3060Ti LHR on defaults options, 45.5 MH/s @ mem+1200 (win10)

: also adapts the 3 new LHR options.

: add option to specify command line outpu to or , , , defaults to .

: disable SNI extension for ssl connections by default, can be enabled with option

: & support

v39.5(2021-09-24)

: new LHR mode for mining ERGO, enable it by manually adding option

Same as LHR mode in , value represents expected hashrate to reach percent of non-LHR GPU’s hashrate, supports comma-seperated list to indicate value for each GPU, and to disable.

For GPUs with Hynix GDDR6 memory, LHR mode is not recommended for the poor performance.

For GPUs with non-Hynix GDDR6 memory, e.g. 3060 3060ti 3070, start trying with

For GPUs with GDDR6X memory, e.g. 3070ti 3080 3080ti, start trying with

When mining lock is detected during ERGO mining, miner will automatically decrease value by 0.5, and continue mining. max decrease times is 10, which sums to 5.0

: Lower power consumption on Nvidia GPUs.

v39.4(2021-09-21)

: Fix error hash issue.

v39.3(2021-09-18)

: new low power LHR mode, add option.

is the default LHR mode, which is the new lower power mode.

changes LHR mode to old version, which is the same as

is suitable for only power limit bounded GPU, can achieve higher hashrate than mode 2

is able to achieve lower average power and temperature. espacially suitable for GPUs with gddr6x e.g.3070ti, 3080, 3080ti. Power consumtion is fluctuating in this mode, better be used with locked core clock.

: support decimal value

: for LHR GPUs, when mining lock is detected, miner will automatically decrease value by 0.1, and continue mining. max decrease times is 10, which sums to 1.0

: higher CPU usage when set

v39.2(2021-09-01)

: added LHR lock detection and recovery in LHR mode.

: added display (if available) for Nvidia and AMD GPU under windows.

: more robust protocol handle.

　　Note: LHR mode requires NVML library to work, please make sure the driver is installed properly and do not add argument.

v39.1(2021-08-21)

: improve hashrate of mode 1 - 2%，default value of changes from 68 to 69，manually set to 70 is also very promising.

: mode support on windows driver 471.11

: issue of v39.0

: issue on windows driver 21.6.1+

v39.0(2021-08-15)

: New LHR mode for ETH mining on RTX 30 series LHR GPUs, supports Windows & Linux, able to get ~70% of maximum unlocked hashrate.

This mode can be tuned by argument , only works for right now.

default to 0, meaning even if is not set, LHR mode with will be applied to LHR GPUs if certain GPUs are detected.

Tune LHR mode by setting , a specific value will tell miner try to reach percent of maximum unlocker hashrate, e.g. will expect to get 68% of hashrate for same model non-LHR GPU.

Higher value will results in higher hashrate, but has higher possibility to run into lock state, which will leads to much less hashrate.

A good start tuning value is 68, which has been tested to be stable on most rig configurations.

value can be set for each GPU by using comma separeted list, , where means turn off LHR mode.

v38.2(2021-07-27)

: AMD kernel error on certain GPUs with 21.6.1+ drivers under windows.

v38.1(2021-06-29)

: high CPU usage in v38.0

v38.0(2021-06-29)

: add support.

: eliminate memory leak by NVML library for Nvidia driver 460+ on windows.

: causes crash on certain situation.

v37.6(2021-06-03)

: cause crash on AMD GPUs when switch DAG file.

: support on GPUs.

v37.5(2021-05-21)

　　​ changes from 37.3

: for AMD GPU, can be faster with ETH mining timings

: slightly improce hashrate on Nvidia GPUs

: use & to protect GPU from overheat, detail in readme.md

v37.3(2021-05-06)

: add option to allow an extra for different cached in GPU memory, useful for mining and mining on .

v37.2(2021-04-24)

: add option for setting of mining pool, old format is disabled， can be added as part of worker or wallet

: minor hashrate improvement on RDNA GPUs

: compatibility issue on lasted AMD driver.

v37.1(2021-03-25)

: high reject ratio on 10 series Nvidia GPUs

: pool compatibility

Recommend miners with & to mine , hashrate will be increased significantly with option.

v37.0(2021-03-19)

: for mining coin on Nvidia GPUs.

: for Nvidia, for AMD

: support new address format

: ‘clBuildProgram error’ issue on Vega for versions 35.0 - 36.1

: disable AMD iGPU by default, can be enabled back by setting

: minor bug fix, improve overall stability

v36.1(2021-01-11)

: Lower power comsumption for 20、30 series Nvidia GPU, improve hashrate 2% on 16 series Nvidia GPU

: Fix performance degradation under win8 & win8.1 for Nvidia 10 series GPUs.

: Slightly reduce stale ratio.

: A random crash bug fix, improve overall stability

: Add & in summary log

: If DAG verification failed, display corresponding GPU name in red in summary.

v36.0(2020-12-28)

: crash on some GPUs in versions

: performance degradation under win7 for Nvidia 10 series GPUs.

: , , , , , , , ,

: smaller binary size

v35.2(2020-12-22)

　　Compared to v35.0

: More stable under high OC for Nvidia 16、20、30 series GPUs.

: Improve hashrate 1-3% for 16, 20, 30 Nvidia GPUs

: DAG verification after creation, if miner showed log in red font: , please consider lower GPU overclock

v35.1(2020-12-21)

: More stable under high OC for Nvidia GPUs

: Improve hashrate 1-3% for 16, 20, 30 Nvidia GPUs

v35.0(2020-12-14)

: Add statistics for , in cmd log, api and web monitor.

: Turn off limitation for not allowing to run under Virtual Machine.

: Add statistics for Health information of AMD GPU

: More detail error information of OpenCL api

: Reduce CPU usage.

v34.5(2020-12-05)

: Improve hashrate 1% on certain Nvidia GPUs

: Minor improvement on certain 20 & 30 series Nvidia GPUs

: More effective and compatibility on Geforce Pascal GPUs

: Fix crash on certain AMD & Nvidia rigs

v34.4(2020-12-02)

: Improve hashrate 1-5% on Nvidia 16, 20, 30 series GPUs, 29.2M on 1660s

v34.3(2020-12-01)

: error on swiching epoch, miners should upgrade to this version.

: support for AMD 20.11.x driver version

: more stable hashrate under windows

v34.2(2020-11-29)

: Reduce stale share ratio.

v34.1(2020-11-28)

: Fix display hashrate only half of normal hashrate on certain windows rigs.

v34.0(2020-11-28)

: Improve hashrate on Nvidia 10 series GPUs，3% higher hashrate under same PowerLimit, or same hashrate with 5%-10% lower PowerLimit.

v33.8(2020-11-25)

: Add support for mining on

v33.7(2020-11-23)

: Add an option , set this option will disable miner interrupting current GPU jobs when a new job coming from pool, will cause less power supply issue, but might lead to a bit higher stale ratio and reject shares.

: Add display in console, showing for each GPU

: Add 10min 4h 24h pool hashrate display in web monitor.

v33.6(2020-11-21)

: improve hashrate: +10% on 16 20 30 series Nvidia GPUs, 27.5M on 1660s.

: From this version, GPUs that has higher core performance than memory performance, need to overclock memory to get higher hashrate, e.g. 2080 3070

33.5(2020-11-21)

: improve hashrate: +90% on 16 20 30 series Nvidia GPUs, at least +100% on all other GPUs

v33.4(2020-11-12)

: improve hashrate: +35% on 16 20 30 series Nvidia GPUs, +20% on all other GPUs

: for upcoming ETC upgrade

: add effective pool hashrate on console & api, 10min 4h 24h.

v33.3(2020-11-04)

: improve hashrate: Nvidia, +3% on 10 series, +20% on 16, 20, 30 series

: for AMD support.

: crash upon start on certain Nvidia rigs.

v33.2(2020-11-01)

: improve hashrate: +150% on 10 series, +80% on 16, 20, 30 series

: cause high CPU usage

: Added back in console summary

v33.1(2020-10-29)

: some format error on console print

: lower CPU usage

: add new option , if no share found in a set period of time, miner will reboot. default to 30 minutes. SOLO miners should set this option to to turn off check.

v33.0(2020-10-28)

: for mining，support both solo mining and pool mining, need Nvidia GPU above 6G

: improve performance on Vega & Navi GPUs

: improve performance on high end 10xx Nvidia GPUs

: modify summary output on console, add share statistics for each GPU.

: fix zero hashrate on certain cases for AMD GPUs

v32.1(2020-10-05)

: Fix AMD device initialization failure on some rigs.

v32.0(2020-09-30)

: for mining with Nvidia 3GB+ GPUs

: add support for Nvidia 6GB GPU

: for AMD RX 4xx, 5xx, Vega series 8GB+ GPUs

: support mining up to epoch 800

v31.1(2020-06-24)

: for on Nvidia 8G above GPUs

: support for ’s protocol

v30.2(2020-05-05)

: Auto install driver if is set and driver is not installed.

: Fix issue on some windows rigs.

: Fix issue on some pools.

v30.1(2020-05-03)

Reduce startup time.

Fix a possible crash on certain rigs of reason .

Do not apply memory tweak if is set to 0 on corresponding gpu.

Print system information on start.

v30.0(2020-04-30)

Add option , optimize memory timings of Nvidia GD5 & GD5X GPUs. Detail describe can be found in readme.md

Add option , print pool communucation log.

Add option , user can using socks5 proxy to set up connection with pool.

Add number of shares per GPU in both log print and api.

Minor bug fix and improvements.

v29.1(2020-04-09)

Fix low hashrate of on AMD RDNA GPU.

Improve kawpow hashrate on AMD GPU.

v29.0(2020-04-03)

Add support for RVN new algo mining on Nvidia & AMD gpus.

v28.1(2020-03-30)

Support HNS & HNS+ETH mining on NiceHash

v28.0(2020-03-28)

Add support for mining TRB & TRB+ETH on Nvidia GPU

Add support for mining ETH on .

Minor improvements and fixes.

v27.7(2020-03-15)

Fix ETH mining on NiceHash

Fix NVML initialization failure on certain cases.

v27.6(2020-03-14)

Improve HNS & HNS+ETH on Nvidia GPU.

v27.5(2020-03-05)

Fix high ETH reject rate on certain pools when mining HNS+ETH

Slightly improve mining HNS+ETH on Nvidia GPU.

v27.4(2020-02-28)

Fix support the certain AMD Vega GPUs.

Fix a potential bug when mining under AMD+Nvidia mixed rig.

v27.3(2020-02-27)

Add HNS+ETH mining on AMD GPU

Improve HNS+ETH performance on Nvidia GPU

Note: calculation is changed in this version for HNS+ETH.

The value of = /

E.g, on a stock freq 1070ti will get 26M for eth & 130M for hns.

v27.2(2020-02-20)

Improve HNS performance on AMD GPU

v27.1(2020-02-19)

Improve HNS performance on Nvidia GPU

Add support for HNS mining for AMD GPU

v27.0(2020-02-18)

Add support for HNS & HNS_ETH mining for NVIDIA GPU

Minor bug fix and improvements.

v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.

Fix bug of 26.1: Launch crash on certain AMD rigs.

v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.

Improve performance for mining CKB on Nvidia GPU.

v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.

Fix CKB compatibility on AMD GPU.

Fix cuckcoocycle on nicehash.

v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.

Fix a compatibility issue in CKB stratum protocol.

v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.

Improve CKB+ETH performance on NVIDIA cards.

Add support for mining SERO on AMD cards.

Add a new option to allow users to choose GPU platform.

v25.2(2019-09-10)

Add support for mining on AMD cards under linux.

Bug fix.

v25.1(2019-09-07)

Add support for mining on AMD cards.

v25.0(2019-09-05)

Add support for mining & + dual mining.

Enhance parameter to support comma separated list to specify value for each card.

The default value of for + mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for .

The best value of differs by GPU model, overclock and power limitation.

v24.4(2019-08-16)

Fix SIPC dxpool compatibility.

1080 & 1080ti users should use to boost SIPC performance.

v24.3(2019-08-15)

Add support for mining SIPC.

Fix high CPU usage mining SERO with 24.1 & 24.2

Fix Grin intensity.

v24.2(2019-07-17)

Disable the auto-switch from cuckaroo -> cuckarood

Slightliy improve RTX2060 Grin29 performance under win10

Fix startup stuck issue on some linux distro.

Add new option to generate a sample config file.

Note: Linux sero mining need to set a env before start if run with –no-watchdog, please check

v24.1(2019-07-16)

Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards

Fix mining Grin29 AE on Turing 6GB Cards on Win10.

Fix the disfunction of auto-reboot when GPU error happens.

Fix start using json config file.

Change the GPU MEM size display upon launch from Total Size to Available Size.

v24.0(2019-07-15)

Support Grin29 fork on 17th, July.

When using algo , v24.0 will do an automatically switch to on height 262080.

Add a temporary option , user can test the auto-switch by setting this option to lower height value.

Improve performance on Grin29 & AE.

Add support for mining , algo .

Add option to set the intensity level for each GPU.

Add option to customize the timeframe for fidelity calculation.

Add option to set a specified log filename.

Add option to close the periodical query for GPU status.

Add new method to turn on NiceHash protocol,

Also compatible with previous url based method.

Minor improvement and bug fix.

v23.3(2019-06-14)

Fix mining AE (cuckoocycle) on NiceHash.

Add option to set a temperature limit on GPU.

v23.2(2019-05-09)

Improve Grin & AE & SWAP performance.

Add support for mining AE on NiceHash.

Add display output of Fidelity.

Minor improvement and bug fix.

v22.2(2019-04-15)

Improve compatiblity for mining Grin31 on windows 8GB cards.

Set default to 4, lower CPU usage on default settings when mining Grin & AE.

v22.1(2019-04-12)

Add support for mining Swap (XWP).

Improve Grin29 & AE performance.

Improve Windows compatibility on Grin & AE, significant boost on performance.

v21.4(2019-04-03)

Improve Grin31 performance.

Improve performance of Grin29 & AE on RTX cards.

Fix Grin31 compatibility on Win7 with 8G cards.

New option to reduce the range of power consumption by multi-gpu rig.

Add miner Up Time print in cmd outputs.

v21.3(2019-03-20)

Fix bug: Occasionlly lower local hashrate than previously version.

Do not run GPU if mining pool not connected when mining Grin & AE.

v21.2(2019-03-15)

Fix bug: happens under some normal conditions.

v21.1(2019-03-14)

Improve Grin29 performance

Add support for mining Grin & AE on Turing cards.

Add detection for GPU hung.

Increase chance of accept share when mining Grin on NiceHash.

Fix ETH mining on NiceHash.

Fix “accecpt share checking” bug when using backup mining pools.

v21.0(2019-03-06)

Add support for AE (Aeternity)

Improve performance on Grin29 & Grin31

Improve miner stability.

v20.0(2019-02-21)

Add support for Grin31

Add support for mining Grin on NiceHash

Add new option to tune CPU usage when mining Grin.

Improve BTM+ETH performance on RTX cards.

FIx bug of lower hashrate when mining BTM on rigs with mixed 10 series and 20 series cards.

Do not add a default worker name if no worker name specified by user.

v14.0(2019-01-30)

BTM mining, improve over 200% on RTX cards.

Improve Grin mining.

v13.2(2019-01-17)

Add support mining Grin on 1066-win10.

Fix support for Solo mining using grin-server.

v13.1(2019-01-15)

Add support for mining Grin coin (cuckaroo29).

Minor bug fix and improvement.

v12.4(2018-01-05)

Improve hashrate of BTM+ETH dual mining about 6%.

v12.3(2018-12-30)

Fix a bug that could cause many reject shares when epoch changes under ETH dual mining .

v12.2(2018-12-26)

Fix high stale share and reject share ratio when use big for dual mining BTM+ETH.

Fix the support of web monitor for dual mining.

Minor bug fixs and improvements.

v12.1(2018-12-24)

Fix support ETH PPS+ mode on F2pool

Add support for ETH on NiceHash (with protocol header )

Fix rest api when dual mining.

Minor bug fixs.

v12.0(2018-12-19)

New dual mining mode.

Decrease the required driver version to 377.

Temporarily remove support for XMR mining.

Fix start using config file.

Add a default protocol header if not specified.

v11.0(2018-12-12)

Improve BTM hashrate.

Add support for ETH and XMR mining.

Optimize handle for new job, increase profit on mining pool.

Colorful output on console.

Add support for backup mining pools.

Decrease dev fee of BTM to 2%.

v10.0(2018-10-03)

Improve hashrate

v9.0(2018-08-28)

Improve hashrate ~30%

Improve stability

v8.0(2018-08-17)

Improve hashrate 10% - 15%

Lower skipped share rate, increase actual hashrate on mining pool.

Added display for mining pool latency.

Added display for mining pool difficulty.

Improve API web monitor.